Import WPA from FreeBSD

We need WPA source files to compile and implement the wpa_supplicant.
We can get the wpa source code from their web site:
https://w1.fi/wpa_supplicant/
For RTEMS-libbsd, we can directly import it from FreeBSD.



1.Firstly, we need add these imported files in libbsd.py.
We create a new module named :usr_sbin_wpa_supplicant, and add files in this module:


+# /usr/sbin/wpa_supplicant
+#
+def usr_sbin_wpa_supplicant(mm):
+    mod = builder.Module('usr_sbin_wpa_supplicant')
+    mod.addUserSpaceHeaderFiles(
+        [
+            'contrib/wpa/wpa_supplicant/ap.h',
+            'contrib/wpa/wpa_supplicant/blacklist.h',
+            'contrib/wpa/wpa_supplicant/bss.h',
+            'contrib/wpa/wpa_supplicant/config.h',
+            'contrib/wpa/wpa_supplicant/config_ssid.h',
+            'contrib/wpa/wpa_supplicant/ctrl_iface.h',
+            'contrib/wpa/wpa_supplicant/driver_i.h',
+            'contrib/wpa/wpa_supplicant/gas_query.h',
+            'contrib/wpa/wpa_supplicant/hs20_supplicant.h',
+            'contrib/wpa/wpa_supplicant/interworking.h',
+            'contrib/wpa/wpa_supplicant/mesh.h',
+            'contrib/wpa/wpa_supplicant/mesh_mpm.h',
+            'contrib/wpa/wpa_supplicant/mesh_rsn.h',
+            'contrib/wpa/wpa_supplicant/notify.h',
+            'contrib/wpa/wpa_supplicant/offchannel.h',
+            'contrib/wpa/wpa_supplicant/scan.h',
+            'contrib/wpa/wpa_supplicant/autoscan.h',
+            'contrib/wpa/wpa_supplicant/wmm_ac.h',
+            'contrib/wpa/wpa_supplicant/wnm_sta.h',
+            'contrib/wpa/wpa_supplicant/wpas_glue.h',
......
+        ]
+    )
+    mod.addUserSpaceSourceFiles(
+        [
+            'contrib/wpa/wpa_supplicant/blacklist.c',
+            'contrib/wpa/wpa_supplicant/bss.c',
+            'contrib/wpa/wpa_supplicant/config.c',
+            'contrib/wpa/wpa_supplicant/config_file.c',
+            'contrib/wpa/wpa_supplicant/ctrl_iface.c',
+            'contrib/wpa/wpa_supplicant/ctrl_iface_unix.c',
+            'contrib/wpa/wpa_supplicant/eap_register.c',
+            'contrib/wpa/wpa_supplicant/events.c',
+            'contrib/wpa/wpa_supplicant/gas_query.c',
+            'contrib/wpa/wpa_supplicant/hs20_supplicant.c',
+            'contrib/wpa/wpa_supplicant/interworking.c',
+            'contrib/wpa/wpa_supplicant/main.c',
+            'contrib/wpa/wpa_supplicant/notify.c',
+        ],



2. Add the configure macro in mm.generator['source'], we need configure the source files to make sure it can run normally on RTEMS. For these configure macro, we can take the FreeBSD config files as a reference.


The configure file in FreeBSD/usr.sbin/wpa/wpa_supplicant/Makefile

CFLAGS+=-DCONFIG_BACKEND_FILE \
-DCONFIG_DEBUG_SYSLOG \
-DCONFIG_DRIVER_BSD \
-DCONFIG_DRIVER_NDIS \
-DCONFIG_DRIVER_WIRED \
-DCONFIG_GAS \
-DCONFIG_HS20 \
-DCONFIG_IEEE80211R \
-DCONFIG_INTERWORKING \
-DCONFIG_PEERKEY \
-DCONFIG_PRIVSEP \
-DCONFIG_SMARTCARD \
-DCONFIG_TERMINATE_ONLASTIF \
-DCONFIG_TLS=openssl \
-DCONFIG_WPS \
-DCONFIG_WPS2 \
-DCONFIG_WPS_UPNP \
-DPKCS12_FUNCS

What we need to do is add these configure macro in mm.generator['source'].


+        mm.generator['source'](['-D__FreeBSD__=1',
+                                '-DCONFIG_BACKEND_FILE=1',
+                                '-DCONFIG_DEBUG_SYSLOG=1',
+                                '-DCONFIG_DRIVER_BSD=1',
+                                '-DCONFIG_DRIVER_NDIS=1',
+                                '-DCONFIG_DRIVER_WIRED=1',
+                                '-DCONFIG_GAS=1',
+                                '-DCONFIG_HS20=1',
+                                '-DCONFIG_IEEE80211R=1',
+                                '-DCONFIG_INTERWORKING=1',
+                                '-DCONFIG_PEERKEY=1',
+                                '-DCONFIG_PRIVSEP=1',
+                                '-DCONFIG_SMARTCARD=1',
+                                '-DCONFIG_TERMINATE_ONLASTIF=1',
+                                '-DCONFIG_TLS=openssl',
+                                '-DCONFIG_WPS=1',
+                                '-DCONFIG_WPS2=1',
+                                '-DCONFIG_WPS_UPNP=1',
+                                '-DPKCS12_FUNCS=1',
+                                '-DCONFIG_SHA256=1',
+                                '-DCONFIG_CTRL_IFACE=1',
+                                '-DCONFIG_CTRL_IFACE_UNIX=1',
+                                '-DIEEE8021X_EAPOL=1',
+                                '-DEAP_MD5=1',
+                                '-DEAP_GTC=1',
+                                '-DEAP_LEAP=1',
+                                '-DEAP_MSCHAPv2=1',
+                                '-DEAP_OTP=1',
+                                '-DEAP_PEAP=1',
+                                '-DEAP_PSK=1',
+                                '-DEAP_TLS=1',
+                                '-DEAP_TTLS=1'],
+                               ['freebsd/contrib/wpa/src',
+                                'freebsd/contrib/wpa/src/utils',
+                                'freebsd/contrib/wpa/src/eap_peer',
+                                'freebsd/usr.sbin/wpa/wpa_supplicant',
+                                'freebsd/crypto/openssl/crypto'])
+    )



3. We need configure a wpa_supplicant command for RTEMS, so we add a command files in rtemsbsd.


+    mod.addRTEMSSourceFiles(
+        [
+            'rtems/rtems-bsd-shell-wpa_supplicant.c',
+        ],
+        mm.generator['source']()
+    )
+    return mod
+


4. Last we need add this module into compile in libbsd.py


     mm.addModule(contrib_expat(mm))
     mm.addModule(contrib_libpcap(mm))
     mm.addModule(usr_sbin_tcpdump(mm))
+    mm.addModule(usr_sbin_wpa_supplicant(mm))
     mm.addModule(crypto_openssl(mm))




评论

发表评论

此博客中的热门博文

RTEMS USB support for BBB document

RTEMS-libbsd USB Support For BBB How to build RSB Create new folder sandbox="$PWD/sandbox" mkdir sandbox cd "$sandbox" Get RSB source code git clone git://git.rtems.org/rtems-source-builder.git Check the environment cd "$sandbox" cd rtems-source-builder/source-builder ./sb-check Configure and build RSB cd ../rtems ../source-builder/sb-set-builder --prefix="$sandbox/rtems-4.12" 4.12/rtems-arm How to build RTEMS Get RTEMS source code git clone git://git.rtems.org/rtems.git Configure and build RTEMS for BBB BSP cd "$sandbox" cd rtems PATH="$sandbox/rtems-4.12/bin:$PATH" ./bootstrap; ./bootstrap -p cd "$sandbox" mkdir BBB_install cd BBB_install PATH="$sandbox/rtems-4.12/bin:$PATH" "$sandbox/rtems/configure" \ --target=arm-rtems4.12 --prefix="$sandbox/rtems-4.12" \ --disable-networking --enable-rtemsbsp=beagleboneblack PATH="$sandbox/rtem...
阅读全文

RTEMS Network Transplantation - rtems system initialization process analysis

图片
RTEMS network-driven migration, we must first know how to put the device initialization function into the initialization process, how to register the network card device to the system. This involves rtems the system initialization, the next specific analysis of the initialization process: System initialization first stage: This part of the code is mainly written in the compilation, part of the bsp, and then rtems into the second phase based on the c code initialization, but before entering the second stage, we must have a reliable operating environment, which is the first stage Assembly code work, summarized as follows: 屏蔽中断 初始化cpu工作模式 建立内核堆栈 对bss段清零 建立基本的内存布局 The start code is located in / rtems / c / src / lib / libbsp / pc386 (here select the corresponding processor) /start/start.s The function call is shown in the following figure: The general implementation process is as follows: 屏蔽中断 读取grub传递的multiboot_info，存放到boot_multiboot_info结构中 跳转到_load_s...
阅读全文

Work Product Submission

图片
Beagleboard BSP projects - GSoC 2017 About RTEMS RTEMS is a open source embedded hard real-time operating system, It good at real-time, stability, development speed and multi-processor support. Now RTEMS is already working on Beaglebone Black, As so far, the ADC, PWM, GPIO is supported on BBB, But the BSP support is not enough. RTEMS official website:  https://www.rtems.org/ Team and mentors Sichen Zhao - Developer Christian Mauderer  - Mentor Punit Vara - Mentor The project - Beagleboard BSP projects: Improvement of I2C, USB and wireless BSP for Beaglebone Black Project Proposal: GSoC 2017-Beagleboard BSP projects Project Ticket:   Beagleboard BSP projects Project wiki:  GSoC 2017-Beagleboard BSP projects Project final code repository: GSoC2017 final code   Goal: This project aims to improve the Beaglebone Black  BSP support on RTEMS. Project intends to add the following supports to the Beaglebone Black BSP: I2C ...
阅读全文